Is your Wavlink Extender creating trouble for you? Do you know what exactly is required to do now? If not, then here we are to help you out, just have a look at the troubleshooting steps to fix the issue you are facing related to the wavlink extender. Before fixing the issue, you must desire to know what kind of issues are there which let your wavlink extender not working, let’s look them first:
- Connectivity Issue Between Wavlink Extender and Main Router
- Extender Setup is Not Adequate
- Disturbed Signals
- Extender Firmware is Not up to Date
- Trouble with Main Router
- Internet Service Provider Issues
Wavlink Extender Not Working: Troubleshoot Steps
Power Cycle the Extender
For smoother operation of your device, you can try power cycle, if there is a minor issue, this action will do well for you by removing the device’s short term memory. To do so you just need to follow underneath steps:
- In the first step, cut the power supply of your extender and let it reset for a moment.
- Next disconnect all the connected wires with your device.
- Wait for about 30 seconds or a minute and plug-in the extender again.
- Let it start and then try to connect to the internet again.
Verify Extender and Main Router Connection
- If the connection between your main router and extender is not established properly, your wavlink extender is not working. Connection between the main router and extender can be possible via two ways: through WiFi or an Ethernet cable.
- If the connection between the main router and extender is through wireless mode, remember to check the power supply of the extender and its placement should be near the main router.
- Monitor the connectivity by looking at the green light on the devices. If no green list is shown on the device try to move your extender closure to the main router. Remember not to place the devices in corners or cabinets.
- If you have more than one device, make sure all are connected together with an Ethernet cable.
- If still the issue is not resolved, then try to connect the Extender and main router by using Ethernet cable to establish a more reliable connection.
Wavlink Extender & Device Range
Wavlink extenders broadcast a wireless network (SSID). To receive the proper signal, you must place your device within the range of the Wavlink Extender. In case your device is not in the range of the extender then you have to face the Wavlink Extender Not Working problem.
Wavlink Extender Incorrect Configuration
It might be possible that your wavlink extender is not configured correctly that’s why you are facing trouble in connection. You can reset your wavlink extender to its factory setting and reconfigure the extender by following the setup process using 192.168.10.1 wizard.
Reset Wavlink Extender
To reset your wavlink extender you need to locate the reset button on the device and press it for about 10 seconds. This will reset the settings back to the default one.
Steps to Configure Extender
You can easily configure your extender and for that just follow as mentioned
- After reset, make sure the wavlink extender is plugged in and switch on.
- Connect a client device with the extender and open the web browser
- Enter http://192.168.10.1 or wifi.wavlink.com in the browser address bar
- Click on enter button and login page will open on the computer screen
- Provide the required information on the screen (default username & password)
- Press the login option and follow the instructions as shown on the screen.
In case, you are not able to set up the device or are experiencing error, you can connect the technical support team.
Change in Wireless Channel of WiFi Router
Most of the wifi routers have multiple channels to broadcast the signal. In case you have a dual band router, just try to change its wireless channel, may it work for you if your wireless channel is interfering with extenders signal. To do so you just need to login on the wavlink setup page and change the network channel by browsing wireless settings.
Extender Firmware Bring up to Date
Wavlink extenders rely on firmware to function correctly, the same as the other wireless extenders available in the market. You can try a firmware update if your wavlink extender is not working properly and you are facing internet connectivity issues. Updating is a very simple process, just follow the mentioned steps
- Go to the extenders web based dashboard
- Login to it and access firmware function from menu
- Follow the screen and complete the update.
Remember, do not disconnect your extender power during the process as it may lead to configuration error. Not to worry at all, if extender may turn on and off automatically throughout the firmware updating process.
Technical Support for Wavlink Extender Not Working
Conditionally, still your wavlink extender not working even after following all the above mentioned steps, you can take technical support from our support team. Feel free to reach us out, for your Wavlink Extender Not Working issue without hesitation.
