When it comes to boosting signals of an existing network, a networking device that stands out in every mind is Wavlink AC600. It is a range extender device that enhances network performance by amplifying the signals of your current network. Its usage will eliminate the no signal zone or dead zone area. You can easily complete the wavlink AC600 setup by using wifi.wavlink.com. The device can be set up in AP mode, repeater mode & router mode as well. Read out the further segment of the article till the last to know step by step guide of setup. 

Wavlink AC600 Setup Instructions

Step by step follow the given process to configure your Wavlink AC600 in AP mode, repeater mode & router mode. To begin the process of Wavlink AC600 Setup you may need an AC600 device along with power adapter, host networking device with working internet, power outlet and a computer/ laptop device with latest version of web browser. After collecting all such items you can proceed with the further mentioned steps. 

Unbox The Wavlink AC600

First and foremost you have to take the device out of the box and assemble it  to begin the setup. Along with the AC600 device in the box you will get wifi ap/range extender/router, detachable omni antenna, RJ45 networking cable, power adapter, PoE converter, main body holder, cable ties, screw fittings and quick guide. 

Search A Location To Place The Device

Once you take out the wavlink AC600 out of the box you may require to search a location where you desire to place the device. You can place the device on a wall or pole. Placement of the device should be made in such a way so that it can transmit signals to the area where you face hurdle with signals and also be able to get the signals from the main device very easily. 

Also remember not to keep the device closer to any radio frequency device or heavy metal object. In addition, avoid placing it in the corners. Remember to keep it a bit closer where reaching the power outlet is easy.  

Turn On The Power Supply

Next steps of the wavlink ac600 setup is turning the power on of the device. The power adapter you get with the device is used to turn the power on. Connect the adapter with the wavlink ac600 device and then to the power outlet. Turn on the power supply and wait until the device power LED lights up and gets stable. 

Connect To The Wavlink AC600 Network

When the device starts up you can connect to the device network. This connection will not allow you to access the internet yet. It’s just to access the device settings. To connect your computer or laptop device with the AC600 network, you have to go to the wifi settings of your device. Search for the wavlink network default SSID “WAVLINK__XX”. Connect to the network by clicking on it and provide the default password as mentioned on the device label. When your device gets connected then you can proceed with the further process.

Access wifi.wavlink.com Web Address

To access the wifi.wavlink.com portal users need to go to a web browser. In the address bar of the web browser you should type the web address or default IP. Hit on the search option and the admin login page will display on the screen. Here you have to use the default admin name and password to get the access of device settings.

Setup Wavlink Ac600 

As you enter the user dashboard you have to select the language and then the mode in which you desire to set up the device. You can opt for any of the below given mode:

• Repeater Mode

• AP Mode

• Router mode

Once the selection of mode is done, choose next and the setup wizard will guide you with the further connection process. You need to go ahead as the setup wizard is guiding you. Complete the configuration and remember to create a new SSID & password for your Wavlink AC600 device network. Once done choose the apply option in the end to finish the process. Also before leaving the setup page run a firmware update check. If any update is available then install it to avoid any trouble with the network. Now your new network is available to use, you can check it by using a wifi enabled device. Move around your space and browse websites, watch high definition content or play online games. 

Conclusion

 

In the gist of the above description i would like to say that the wavlink AC600 setup is not a difficult process to follow. Anyone can proceed with the process by following the step by step guide to enhance their existing home networking system. Setup of wavlink AC600 will not only boost signal strength but also offer a stable and reliable connection. Even after carefully getting the process knowledge you got stuck with it then you can take help of a tech expert. A tech expert will be able to give you more clear information.